Nuovo 250W ATX Enhance ENP-2320 ENP-2320A ENP-2322B-G ENP-2322C Alimentatore Alta qualita

Published on May 23 2017

250W ATX for Enhance ENP-2320 ENP-2320A Power Supply prodotto nuovo,Garanzia 1 anno,accessori compatibili,Ottimo sostitutivo della batteria originale. Certificato norme CE
Il design compatto rende questo alimentatore il ricambio ideale per sostituire l`originale.
In caso di dubbi non esitate a contattarci: risponderemo entro 24 ore a tutte le vostre domande.

Numero di prodotto compatibile:

Output Wattage 250W
This is an 80 PLUS Bronze Certified: Power Supply Units (PSUs) that have more than 80% energy efficiency at 20%, 50% and 100% of rated load, and a power factor of 0.9 or greater at 100% load. That is, PSUs that waste 20% or less electric energy as heat at the specified load levels, thus reducing electricity use and bills compared to less efficient PSUs.

Dimension: 3.2"(W) X 5.9"(L) X 1.7"(H)
Form Factor: TFX12V
Active PFC/CE, UL/CUL Safety Compliant
Input Voltage: 100-240V 4-2A VAC Auto Sensing
Frequency: 60-50Hz
Holdup Time: > 14ms @ Full Load
MTBF: 100,000 HRS
DC Output: +3.3V 17A, +5V 13A, +12V 16A, -12V 0.3A, +5Vsb 2A
Dimensions: 5.9"x 3.2"x 1.7" (150Lx82Wx43H mm)
Connectors:
1x 20/24 Pin ATX Connector
1x 4-Pin 12V
3x Peripheral Connectors (MOLEX 4 PIN)
1x Power Connector for Floppy Drives.
2x SATA connectors

    Achme AM630BS20S
    FSP200-50PLA
    Shuttle PS-X200W
    WIN-200PS (original PS has extra 6 pin auxiliary connector)
    Enhance ENP-2320
    Enhance ENP-2320A
    Enhance ENP-2322B-G
    Enhance ENP-2322C
    Enhance ENP-0812A

    Use this power supply to replace the power in your Shuttle XPC mini-barebones system such as SB61G2, SS51G, SK41G SB51G and many others.
    NOTE: If you own the early Shuttle SV25 with the wires coming out the top (long side) of the power supply, this model will not fit in your case.

      Questa batteria è anche compatibile con:

       

      Published on #ENP-2320 Alimentatore

      Repost0
      To be informed of the latest articles, subscribe:
      Comment on this post